✓ PETROLEUM ENGINEERING Project Topics for NCE, OND, HND, Undergraduates and Masters

SN	Project Title	Department	Pages
1	PRODUCTION OF BIODIESEL FROM WASTE VEGETABLE OIL USING EGGSHELL BASED CATALYST	PETROLEUM ENGINEERING	58
2	DEREGULATION OF THE DOWNSTREAM OIL SECTOR IN NIGERIA AS A PANACEA TO ECONOMIC RECOVERY OF THE COUNTRY: AN ANALYSIS OF 2010-2015 ECONOMIC PROGRAMME OF ...	PETROLEUM ENGINEERING	57
3	INVESTIGATION INTO PIPELINE VANDALISM IN NIGER DELTA(NIGERIA) (A Case Study Of Abiteye in Warri South West, Delta State )	PETROLEUM ENGINEERING	57
4	TREATMENT OF PRODUCED WATER TO MEET IRRIGATION STANDARD	PETROLEUM ENGINEERING	57
5	UTILIZATION OF NODAL ANALYSIS TECHNIQUE FOR SELECTING THE OPTIMUM TUBING SIZE TO ACHIEVE AN OPTIMUM PRODUCTION RATE IN NATURALLY FLOWING WELL VIA MODE...	PETROLEUM ENGINEERING	57
6	THE EFFECTS OF CONTAMINANTS ON THE FLOW OR RHEOLOGICAL PROPERTIES OF OIL-BASED MUD	PETROLEUM ENGINEERING	57
7	SIMULATION OF GAS DEHYDRATION ON AN FPSO USING ASPEN HYSYS	PETROLEUM ENGINEERING	57
8	ASSESSMENT OF SAFE AND COST-EFFECTIVE METHODS TO MAXIMIZE PRODUCTION (PROFITABILITY) FROM A GAS-LIFTED FIELD	PETROLEUM ENGINEERING	57
9	ANALYTICAL STUDY OF A SMALL SCALE BIOMASS GASIFIER	PETROLEUM ENGINEERING	57
10	DETERMINATION OF THE FLOWING BOTTOM-HOLE PRESSURE OF A VERTICAL WELL FROM SURFACE PRESSURE AND WELL PARAMETERS	PETROLEUM ENGINEERING	57
11	THE SUITABILITY OF EGGSHELL AND SNAIL SHELL WASTE AS LOCAL MATERIALS IN IMPROVING THE PH OF MUD	PETROLEUM ENGINEERING	57
12	PREDICTION OF THE DEW-POINT PRESSURE OF A GAS CONDENSATE RESERVOIR	PETROLEUM ENGINEERING	57
13	PUMP CAPACITY DETERMINATION FOR TWO-PHASE VERTICAL FLUID FLOW.	PETROLEUM ENGINEERING	57
14	IMPROVED MODEL FOR PREDICTION AND REMEDIATION OF FORMATION DAMAGE IN OIL WELLS.	PETROLEUM ENGINEERING	57
15	GAS DEHYDRATION USING TRIETHYLENE GLYCOL (A CASE STUDY OF SHELL, UGHELI).	PETROLEUM ENGINEERING	57
16	LOCAL CONTENT IN THE OIL AND GAS INDUSTRY OF NIGERIA: CHALLENGES, PROSPECTS AND THE WAY FORWARD.	PETROLEUM ENGINEERING	57
17	DESIGN OF AN ARTIFICIAL LIFT SYSTEM FOR OPTIMIZATION PRODUCTION FOR WELL J-50.	PETROLEUM ENGINEERING	57
18	DRILLING FLUID ADDITIVE; AN OVERVIEW, HISTORY OF LOCAL CONTENT DRILLING FLUID ADDITIVE CONSIDERING GUM ARABIC.	PETROLEUM ENGINEERING	67
19	GAS LIFT OPTIMIZATION OF OIL PRODUCING WELLS USING PROSPER NODAL ANALYSIS.	PETROLEUM ENGINEERING	57
20	DEVELOPMENT OF NODAL ANALYSIS FOR PRODUCTION OPTIMIZATION- A SOFTWARE ASSISTED APPROACH.	PETROLEUM ENGINEERING	57
21	CAUSES OF PROJECT FAILURE AND ABANDONMENT IN GHANA (ACCRA).	PETROLEUM ENGINEERING	53
22	AN APPROACH TO WELL PLACEMENT AND PRODUCTION IN A GREEN FIELD.	PETROLEUM ENGINEERING	57
23	REDUCTION OF OIL SPILLAGE USING WOOD PLASTIC COMPOSITE FROM SAW DUST, WHITE SAND AND LOW DENSITY POLYETHYLENE WASTE	PETROLEUM ENGINEERING	52
24	GAS LIFT OPTIMIZATION OF OIL PRODUCING WELLS USING PROSPER NODAL ANALYSIS	PETROLEUM ENGINEERING	52
25	AN ASSESSMENT OF GRAVEL PACKING METHODS USED IN THE PETROLEUM INDUSTRY.	PETROLEUM ENGINEERING	52

• «
• 1
• 2
• »